Trajectory Reverse Camera

Trajectory Reverse Camera from Volkswagen
The Trajectory camera provides a moving guide lines (yellow ) to show the driver the intended path of travel when he turns the steering.  This is only guide and the driver should not be too dependent on what he sees on the HU.



The system consist of a harness with a special camera and trajectory module.

Golf/Polo/EOS/ Passat Trajectory Kit



Tiguan /Touran Trajectory Kit

After installation, there would be an error code for the camera calibration



The only way to calibrate the Camera is to use the VAS PC software...i.e. VAS5054A and the Calibration Tool VAS6350 which cost about US$1750 !
Snap On VAS6350 Calibration Tool )

Had did some improvisation and managed to get the calibration done none the less !
Using the "special"  calibration template




Calibration Template as seen from RNS510 Head Unit. 
After camera reconises the VAS6350 template, calibration process goes into Phase 2
In Phase 1, if the template is not recognised, it would end as a failure.  Error Message "Template Not Recognised"

In Phase 2, if wrong data are keyed into the calibration process, i.e. camera height, template height and distance....the process would end in error message " Input Data Beyond Calibration Value" .


Previous attempt to calibrate resulted in successful attempt but an error code would still appear on the 6C Back Up Camera Module



Calibrating Bern's Passat CC

The Picture seems sharper and clearer after the calibration.....or is it my imagination ? 

.....Finally, No Fault Code Found on 6C Back Up Camera ! 




Tiguan 5N Trajectory Camera Calibrated 100%





To give you an idea of the work involved in the actual workshop calibration involved, you may want to watch this Chinese video ( only one I could find )....does not need to understand Chinese.....video is self explanatory. 





No comments:

Post a Comment